top of page

Sea Level Tank Monitoring

We are proud to offer and install the Sea level Tank Monitoring Systems from Garnet which provide superior tank sensors for your RV's Fresh, Grey and Black Water systems.

Combined with the Victron Cerbo GX On Board Control system and Monitor, you are able to not only control and monitor your entire RV's Inverter, Solar and Power system, but also monitor your tank levels at all times...even remotely!

The SeeLevel 4 Tank Monitoring System is designed for accurate level measurement of 5th wheel trailers with four holding tanks. This system monitors battery voltage, fresh, grey, galley and black water levels. The level in percent is shown on a three digit LED display. This model includes a single-pole pump switch on the display panel.

  • Monitors battery voltage, fresh water tank, grey water tank, black water tank and galley tank

    • Includes Fresh Water Pump Switch

  • Provides accurate tank level information using percentage of full readout

  • Tanks are monitored using Garnet’s proprietary external level sensing technology

    • This ends fouling problems caused by debris build-up in the holding tank

    • Detailed diagnostic information monitors sender operation

  • Measures tanks from 3.5" to 34" depending on the sensors you specify.

    • 710-AR Sender (standard) 3.5" min to 10.5" max (stacked = 21")

    • 710-ES2 Sender (optional) 5.5" min to 14" max (stacked = 25")

    • 710-SS Sender (optional) 7" min to 14" max (stacked = 34")

  • Grey and galley water tanks are limited to 14" Tall

    • Sensors cannot be stacked on those tanks

  • Tank senders connect to the display via a common bus network

    • All senders can be connected using the same wire

  • Uses common industry connector for ease of installation and servicing

  • Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts

  • Current drain is less than 200mA

  • Panel Dimensions: 4" W x 2.8" H x 1" D

    • Required Cutout Size: 3" W x 1.8" H

  • Includes:

    • (1) Display monitor.

    • (1) pigtail

    • (4) mounting screws.

    • (4) 9″ 710-AR standard tank senders

  • NOTE: If you have taller tank(s) and require a 12" Sender = 710-ES or 16" Sender 710-SS specify in the checkout order notes along with quantity of each.

  • Senders will not work on metal tanks.

  • Limited 1 year manufacturer warranty

Seelevel II RV Tank Monitor Comparison Guide
 

With over 25 years in the RV industry and over 200,000 installations, the SeeLeveL II RV Holding Tank Monitor is a proven, reliable, liquid level monitoring solution. Garnet’s RV monitoring systems are known as “the gauge that works” for a reason. Garnet’s state-of-the-art digital technology provides percentage of full accurate tank measurement readouts - making it one of the most accurate monitors available on the market.

SeeLevel RV Tank Monitor System
Tank Monitor Comparison Guide
bottom of page